Feeders · Troubleshooting
Start by stopping drips and spills, then make the nectar harder for insects to reach, and try the feeder in a new spot if wasps have already found it. Keep oils and sprays off the feeder, where they can end up on the birds.
A few wasps at the ports don’t usually stop hummingbirds from feeding, so you can make one change at a time and watch what happens in your yard.
What are you seeing at the feeder?
The wasps at a feeder are usually yellowjackets, and they’re worst in late summer and fall. By then many are foraging for sugar for themselves, so any easy source—a picnic, a trash can, a sticky feeder—gets their attention. Use what you see to decide where to start.
| What you see | What to check or try |
|---|---|
| Sticky drips or a wet ring on the outside | Nectar is reachable without going through a port.
Next: Step 1 |
| Wasps crowding the feeding ports | They’re looking for nectar at the openings; check for spills or easy access. |
| Wasps return to the same spot every day | They may have learned where the sugar is.
Next: Step 3 |
| A few wasps, and hummingbirds still feeding | A common late-season pattern.
Next: Keep the feeder clean; see living with a few |
| A nest near a door, patio or play area | A separate safety issue from the feeder.
Next: See the safety note |
Three practical changes to try
Start with drips and spills, then choose the next change that fits what you’re seeing. You can try a new spot before buying a replacement feeder.
-
Stop drips and spills
Fill the feeder over a sink, wipe the outside dry before you hang it, and don’t fill past the line. If it still weeps, look for a crack, a worn gasket or a base that isn’t screwed on straight.
Clean the feeder on a regular schedule too; our feeder-cleaning guide has the routine. Keep using the ordinary mix from our nectar recipe—there’s no need to change it because of wasps.
-
Make the nectar harder to reach
In a saucer (dish) feeder, the nectar sits in a basin below the ports and the feeder isn’t hung upside down, so it’s less prone to dripping than many inverted bottle feeders. It’s a sensible choice if wasps are a regular problem, though anything spilled on top is still reachable. Our saucer vs. bottle comparison covers the other trade-offs.
Insect guards—small perforated caps over the ports—add distance between the opening and the nectar that a hummingbird’s bill can reach past. Expect partial help: guards can deter bees, but wasps may keep trying to reach the nectar.
About yellow parts: Cornell’s advice about yellow guards concerns bees; it doesn’t establish how a color swap will affect wasps. If your feeder has yellow guards and you’d like to try red, use red guards made for that feeder model. Don’t remove a working guard and leave the port open.
-
Try a new spot—or some shade
Moving the feeder can disrupt insects that have learned where it hangs, and hummingbirds generally find a feeder they already use. Treat it as a trial: move it, keep it clean, and watch whether wasp traffic drops.
If you can, choose a spot with some afternoon shade.
If that isn’t enough
When it’s fine to live with a few
If a few wasps are present and hummingbirds can still feed, you may be able to leave things alone. Wasps and hummingbirds do squabble over ports at times, but the birds are persistent and usually find a free one. Yellowjackets also prey on many insects gardeners consider pests, and the late-summer rush eases as their season ends.